Spec Sheet

t: 949.417.5207 l www.newportbrass.com
©2021 Brasstech, Inc.
211
NEWPORT BATH
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAMPO/cUPC
• IPC
• Energy Policy Act of 1992
• California Energy Commission
• All applicable US Federal and State material regulations
• Other: This product is NOT watersense certified
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel - PVD
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
Page 1 of 2 Spec_211_d_3.21
EN-4300w
Features
• Solid brass construction
• Traditional styling
• 8-nozzle design with variable spray modes
• Side-mounted rotational spray control
• 1/2” NPT inlet pivot ball fitting
• 3.61” (9.2 cm) showerhead diameter
• 1.8 GPM (6.8 LPM) Max
Showerhead
The Showerhead shall be of solid brass construction while incorporating a non-metallic showerhead engine. Showerhead shall have an
8-nozzle design with variable spray modes and incorporate a side-mounted rotational spray control functionality. Showerhead shall have a
1/2” NPT inlet fitting and 3.61” (9.2 cm) showerhead diameter while operating at 1.8 gallons (6.8 liters) per minute maximum flow rate.
Showerhead shall be Newport Brass Model 211/___.
15S
10B 26 Other15
Model Description Colors | Finishes
211 Showerhead
Specied Model
Product Specication
Add “Color / Finish” sufx to Model number, below.