User guide

INDOOR WALL-MOUNT LIGHT FIXTURE

INSTALLATION INSTRUCTIONS

MODEL No: 12-51 & 52, 15-51 & 52, 22-51 & 52

(Note: -52, double series, not shown but typical installation)

Congratulations on the purchase

of this Newport Brass product,

an excellent choice that will give you

years of quality service and enhance

the look and style of your home.

PAGE 1
INDOOR WALL-MOUNT LIGHT FIXTURE INSTALLATION INSTRUCTIONS MODEL No: 12-51 & 52, 15-51 & 52, 22-51 & 52 (Note: -52, double series, not shown but typical installation) Congratulations on the purchase of this Newport Brass product, an excellent choice that will give you years of quality service and enhance the look and style of your home.
PAGE 2
WALL MOUNT ONLY SHADE UP INSTALLATION ONLY CAUTION: DISCONNECT POWER Always shut off power when installing or repairing this, or any other electric appliance. FAILURE TO DO SO MAY RESULT IN SEVERE INJURY OR DEATH Installation by a licensed electrical contractor recommended. 1 Preparing Wall Outlet A. Check fit the light fixture base over outlet box to ensure cutout in wall will be covered completely after installation. B.
PAGE 3
2 Wire Light Fixture to Outlet Support Fixture during wiring process. A. First attach setscrew into fixture base. B. Strip, clean and twist together black fixture wire with live outlet wire. Next, strip, clean and twist together white fixture wire with neutral outlet wire. Use wire nuts to secure connections and cover all exposed wires. C. Connect fixture/outlet ground wire(s) to mount plate using washer and ground screw. 3 Mount Light Fixture to Wall Remove bulbs and shut off power prior to step 3. A.