Specification Sheet
t: 949.417.5207 l www.newportbrass.com
©2015 Brasstech, Inc.
233-601
NEWPORT BATH
Features
• Solid brass construction
•
O-ring retention system for easy installation and access
• Unique pattern across a 6” x 6” grid
Product :
The Shower Drain Trim shall be made of solid brass construction. Product shall incorporate O-ring retention system and a unique pattern
across a 6” x 6” grid. Shower Drain Trim shall be Newport Brass Model 233-601/____and Shower Drain Throat shall be Newport Brass
Model 277-02. [ Shower Drain Body shall be Newport Brass Model 278__-02]. [ Shower Drain Adapter shall be Newport Brass Model
277-02A]. [ 2” No-Hub Coupling shall be Newport Brass Model 1-288].
15S
10B 26 Other15
233-601 6” Square Shower Drain
Page 1 of 2 Spec_233-601_c_6.18
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel - PVD
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
Required Accessory:
Drain Throat Drain Body (or Hot Mop Adapter) (select one) Coupling
6” Square
Shower
Drain Throat
PVC Drain Body
(Not Hot Mop
Safe)
ABS
Drain Body
(Not Hot Mop
Safe)
Cast Iron Drain
Body
(Hot Mop Safe)
Hot Mop
Adapter*
2” No Hub
Coupling**
6” x 6” Drain 2” IPS 2” IPS 2” IPS 2” IPS Mounts over 2”
Cast Iron Outlet
2” IPS 2” Solvent Weld 2” Solvent Weld 2” Cast Iron Bolted Flange Mounts over 2”
Cast Iron Pipe
277-02 278P-02
278A-02
278-02
277-02A
1-288
*N o t e: H ot M o p A da p t e r (277-01 A) i s c o m p a t i b l e w i t h D r a i n B o d i e s o f f e r e d b y o t h e r m a n u f a c t ur e r s . S e e S p e c S h e e t f o r c r o s s- r e f e r e n c e i n f o r m a t i o n .
**Note: 2” No Hub Coupling (1-288) is required for mounting the 2” outlet of Cast iron Drain Body (278-01) to the 2” cast iron drain pipe of the
drain system.
Meets or exceeds the following at date of manufacture:
• ASME A112.18.2-2011/CSA B125.2-11
• IAPMO/cUPC
• All applicable US Federal and State material regulations