Installation Sheet

Table Of Contents

INSTALLATION INSTRUCTIONS

PULL-DOWN KITCHEN FAUCET

Model No's: 1500-5103, 1500-5113, 1500-5143, 1500-5203, 1500-5223, 1400-5113, 3290-5113, 3290-5223,

3170-5103, 3170-5203, 1030-5103, 1030-5223, 1500-5123, 3210-5103, 3210-5203, 3190-5113, 3190-5223,

2470-5103, 2470-5223, 3200-5113, 3200-5223, 1200-5103, 1200-5223, 2510-5103, 2510-5203, 3180-5113,

3180-5223, 2940-5103, 2940-5123, 2940-5223, 2500-5123, 2500-5223, 3160-5103, 3160-5203,

3310-5103, 3310-5203, FE-3340-5143, FE-3340-5243, 3360-5113, 3290-5143

Congratulations on the purchase

of your Newport Brass product, an

excellent choice that will give you

years of quality service and enhance

the look and style of your home.

PAGE 1
INSTALLATION INSTRUCTIONS PULL-DOWN KITCHEN FAUCET Model No's: 1500-5103, 1500-5113, 1500-5143, 1500-5203, 1500-5223, 1400-5113, 3290-5113, 3290-5223, 3170-5103, 3170-5203, 1030-5103, 1030-5223, 1500-5123, 3210-5103, 3210-5203, 3190-5113, 3190-5223, 2470-5103, 2470-5223, 3200-5113, 3200-5223, 1200-5103, 1200-5223, 2510-5103, 2510-5203, 3180-5113, 3180-5223, 2940-5103, 2940-5123, 2940-5223, 2500-5123, 2500-5223, 3160-5103, 3160-5203, 3310-5103, 3310-5203, FE-3340-5143, FE-3340-5243, 3360-5113, 3290-5143 Con
PAGE 2
Recommended Installation by a Professional Plumbing Contractor ATTENTION: Do not cut pex supply line during installation. Doing so will void product warranty and expose installer to potential liability. Note: These supply lines easily coil and flex to ensure a clean installation without the need to reduce their length A. This product meets the flow rate and performance requirements of the harmonized Uniform Plumbing Code (cUPC).
PAGE 3
7. In order to flush debris from the supply lines and prevent clogs inside the pulldown hose and spray head: Hold the bucket underneath the OUTLET (8), while slowly opening the supply stops to flush the lines. See Figure 4. 8. Return faucet handle to the off position, and carefully remove the bucket of water. 9. Connect HOSE (6) to the OUTLET (8). See Figure 5b. Attach CLIP (7) to the connection between the HOSE (6) and OUTLET (8).