Instruction Manual

Recommended installation by a Professional Plumbing Contractor

Remove FLANGE NUT (1) from threaded shank of ESCUTCHEON (2) and SPRAY

HOSE (3).

Drop SPRAY HOSE (3) and ESCUTCHEON (2) unit through mounting hole surface.

From underside of mounting surface, slide SPRAY HOSE through FLANGE NUT (1) and

secure into place by threading FLANGE NUT (1) onto shank of ESCUTCHEON (2).

Connect to existing faucet options:

NOTE: DO NOT CONNECT SIDE SPRAY HOSE DIRECTLY TO THE MAIN WATER SUPPLY.

a. Wide spread faucets - Remove DIVERTER TEE ADAPTER PLUG (4) from end of SPOUT DIVERTER (5).

Utilizing ADAPTER (6), connect SPRAY HOSE (3) to SPOUT DIVERTER (5)

b. Bridge faucets - Thread SPRAY HOSE (3) into base of DIVERTER ASSEMBLY BLOCK (7). Do not use

ADAPTER (6)

SIDE SPRAY INSTALLATION

INSTRUCTIONS

MODEL No's: 129, 2470-5703

NWP-129

Cold water supply

Cold

side

06/25/12