Specifications
page 1 of 2 spec_
Product Specication:
Add "Color / Finish" sufx to Model number, below.
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for
additional color/nish options.
2500-5613_rev-b 08.13
Features
Solid brass construction
Quarter-turn washerless ceramic disc valve cartridge
c Contemporary lever handle design
Spout assembly with integral supply hoses
Spring-loaded, normally closed lever handle
7-7/16" (18.9 cm) spout height at outlet
3-15/16" (10.0 cm) spout reach (c-c)
1.5 gallons (5.7 liters) per minute maximum flow rate
For single hole configurations
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
ASME A112.18.1/CSA B125.1
IAPMO/cUPC
IPC
NSF 61
Energy Policy Act of 1992
All applicable US Federal and State material regulations
Specied Model
Model Description Colors / Finishes
2500-5613 Hot Water Dispenser Faucet
15 15S 26 10B Other
5-036 Point-of-Use Water Heater (115V, 140¡F to 190¡ range)
©2012 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
2500-5613
VESPERA
Hot Water Dispenser Faucet
The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply
hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate a traditional lever handle design and
feature a spring-loaded, normally closed hot lever mechanism. Hot Water Dispenser Faucet shall have a 1.5 gallons (5.7 liters) per minute
maximum flow rate and accommodate single hole configurations. Product shall incorporate a 7-7/16" (18.9 cm) spout height at outlet and a
3-15/16" (10.0 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 2500-5613/____ . [Point-of-Use Water
Heater shall be Newport Brass Model 5-036].
ASME A112.18.1/CSA B125.1
Solid brass construction
Quarter-turn washerless ceramic disc valve cartridge
Spring-loaded, normally closed lever handle
c
Contemporary lever handle design
7-7/16" (18.9 cm) spout height at outlet
1.5 gallons (5.7 liters) per minute maximum flow rate
Spout assembly with integral supply hoses
3-15/16" (10.0 cm) spout reach (c-c)
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog
for additional color/finish options.
15S
10B 2615
Page 1 of 2 Spec_2500-5613_c_6/15
t: 949.417.5207 l www.newportbrass.com
©2015 Brasstech, Inc.
Features
• Solid brass construction
• Quarter-turn washerless ceramic disc valve cartridge
• Contemporary lever handle design
• Spout assembly with integral supply hoses
• Spring-loaded, normally closed lever handle
• 7-7/16” (18.9 cm) spout height at outlet
• 3-15/16” (10.0 cm) spout reach (c-c)
• 1 gallons (3.6 liters) per minute maximum fl ow rate*
• For single hole confi gurations
Point-of-Use Water Heater (115V, 140° to 190° range)
page 1 of 2 spec_
Product Specication:
Add "Color / Finish" sufx to Model number, below.
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for
additional color/nish options.
2500-5613_rev-b 08.13
Features
Solid brass construction
Quarter-turn washerless ceramic disc valve cartridge
c Contemporary lever handle design
Spout assembly with integral supply hoses
Spring-loaded, normally closed lever handle
7-7/16" (18.9 cm) spout height at outlet
3-15/16" (10.0 cm) spout reach (c-c)
1.5 gallons (5.7 liters) per minute maximum flow rate
For single hole configurations
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
ASME A112.18.1/CSA B125.1
IAPMO/cUPC
IPC
NSF 61
Energy Policy Act of 1992
All applicable US Federal and State material regulations
Specied Model
Model Description Colors / Finishes
2500-5613 Hot Water Dispenser Faucet
15 15S 26 10B Other
5-036 Point-of-Use Water Heater (115V, 140¡F to 190¡ range)
©2012 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
2500-5613
VESPERA
Hot Water Dispenser Faucet
The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply
hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate a traditional lever handle design and
feature a spring-loaded, normally closed hot lever mechanism. Hot Water Dispenser Faucet shall have a 1.5 gallons (5.7 liters) per minute
maximum flow rate and accommodate single hole configurations. Product shall incorporate a 7-7/16" (18.9 cm) spout height at outlet and a
3-15/16" (10.0 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 2500-5613/____ . [Point-of-Use Water
Heater shall be Newport Brass Model 5-036].
ASME A112.18.1/CSA B125.1
ASME A112.18.1/CSA B125.1
*A Water Dispenser fl ow rate of approximately 1 gpm or less is
typical but will vary depending on installation specifi c factors
including in-line water pressure and water fi ltration system.
The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply
hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate a traditional lever handle design and
feature a spring-loaded, normally closed hot lever mechanism. Hot Water Dispenser Faucet shall have a 1 gallon (3.6 liters) per minute
maximum fl ow rate and accommodate single hole confi gurations. Product shall incorporate a 7-7/16” (18.9 cm) spout height at outlet and
a 3-15/16” (10.0 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 2500-5613/____ . [Point-of-Use Water
Heater shall be Newport Brass Model 5-036].