Manualshelf

Spec Sheet

ManualsBrandsNewport Brass ManualsAppliancesVespera Collection 2500-5623/14 1.5 GPM Deck Mounted Single Hole Cold Water Dispenser with Lever Handle in Gun Metal
12
t: 949.417.5207 l www.newportbrass.com
©2021 Brasstech, Inc.
2500-5623
VESPERA
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAMPO/cUPC
• NSF/ANSI 61, SECTION 9
• NSF/ANSI 372
• IPC
• ADA & ICC/ANSI A117.1
• Energy Policy Act of 1992
• California Energy Commission
• All applicable US Federal and State material regulations
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel - PVD
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
Page 1 of 2 Spec_2500-5623_c_6.21
EN-4300jj
Features
• Solid brass construction
• Quarter-turn washerless ceramic disc valve cartridge
• ADA compliant contemporary cold lever handle
• Spout assembly with integral supply hoses
• 7.53” (19.1 cm) spout height at outlet
• 3.93” (10.0 cm) spout reach (c-c)
• For single hole configurations
• ADA Compliant
• 1.5 GPM (5.7 LPM) Max
Cold Water Dispenser Faucet
The Cold Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply
hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate an ADA compliant transitional cold lever
handle design. Cold Water Dispenser Faucet shall have a 1.5 gallon (5.7 liters) per minute maximum flow rate and accommodate single
hole configurations. Product shall incorporate a 7.53” (19.1 cm) spout height at outlet and a 3.93” (10.0 cm) spout reach (c-c). Cold Water
Dispenser Faucet shall be Newport Brass Model 2500-5623/____ . [Integrated Air Gap Base shall be Newport Brass Model 6-291/____].
.
15S
10B 26 Other15
Model Description Colors | Finishes
2500-5623 Cold Water Dispenser Faucet
6-291 Integrated Air Gap Base N/A
Specied Model
Product Specication
Add “Color / Finish” sufx to Model number, below.
** The use of an air gap is required for dispenser faucets drawing from a reverse osmosis filtration system. The Integrated Air Gap Base
(6-
291) affords the functionality of a separate air gap within the design of the product as depicted. Failure to specify the Integrated Air Gap
Base (6-291) will result in a product constructed using the standard base (no internal air gap).

Summary of content (2 pages)