HAND SHOWER SET - WALL MOUNT INSTALLATION INSTRUCTIONS Model No: 280N, 280A, 280B, 280C, 280G, 280H, 280K, 280M, 280J 2001 CARNEGIE AVE, SANTA ANA CA 92705 (949) 417-5207 WWW.NEWPORTBRASS.
We recommend Installation of this product by a Professional Plumbing Contractor Supply Elbow Installation: Based on finished wall thickness, installer must use an appropriate length 1/2” NPT NIPPLE (1), not included, for hand SHOWER (8) installation. Apply thread sealant to both ends of the NIPPLE (1) and thread into FITTING (2) behind finished wall. Attach supply ELBOW (3) onto other end of NIPPLE (1).
Hand Shower and Hose Installation: Place rubber WASHER (10) into both ends of HOSE (9). Attach longer conical end of HOSE (9) onto hand SHOWER (8). Note: This end of HOSE (9) has swivel joint to prevent coiling of HOSE (9). Attach the other end of HOSE (9) onto supply ELBOW (3). See Figure 1. Place hand SHOWER (8) into HOLDER (6).
