Specification Sheet

page 1 of 2 spec_

NEWPORT BATH

281-1

Handshower

Features

• Solid brass construction

• Traditional styling

• Multi-function engine with 3 spray modes

• Rubber nozzles facilitate easy cleaning

• Incorporates twin back-check valves

• 1/2" NPSM inlet fitting

• 4" (10.2 cm) showerhead diameter

Codes / Standards Compliance

Meets or exceeds the following at date of manufacture:

• ASME A112.18.1/CSA B125.1

• IAPMO/cUPC

• IPC

• Energy Policy Act of 1992

• All applicable US Federal and State material regulations

Product Specication:

The Handshower shall be of solid brass construction while incorporating a non-metallic handshower engine. Handshower shall have a

multi-function shower engine with 3 spray modes incorporating rubber nozzles to facilitate easy cleaning. Handshower shall incorporate

twin back-check valves within the handle. Handshower shall have a 1/2" NPSM inlet fitting and 4" (10.2 cm) showerhead diameter while

operating at 2.0 gallons (7.6 liters) per minute maximum flow rate. Handshower shall be Newport Brass Model 281-1/___.

Add "Color / Finish" sufx to Model number, below.

Colors / Finishes

15:

15A:

26:

10B:

Polished Nickel

Antique Nickel

Polished Chrome

Oil Rubbed Bronze

• Other: Refer to the Newport Brass catalog for

additional color/nish options.

t: 949.417.5207 | www.newportbrass.com

Specied Model

Model Description Colors / Finishes

281-1 Handshower

15A

26 10B Other

PAGE 1
NEWPORT BATH Handshower Features 281-1 • Solid brass construction • Traditional styling • Multi-function engine with 3 spray modes • Rubber nozzles facilitate easy cleaning • Incorporates twin back-check valves • 1/2" NPSM inlet fitting • 4" (10.2 cm) showerhead diameter Codes / Standards Compliance Meets or exceeds the following at date of manufacture: • ASME A112.18.1/CSA B125.
PAGE 2
81-1 Product Dimensions (units are in inches) Newport Bath Handshower 281-1 page 2 of 2 spec_ 281-1 t: 949.417.5207 | www.newportbrass.com ©2011 Brasstech, Inc.