Specification Sheet

page 1 of 2 spec_
NEWPORT BATH
283-5
283-5
Handshower
Features
• Solid brass construction
• Traditional styling
• Single function spray
• Rubber nozzles with finished spray surface
• Incorporates twin back-check valves
• 1/2" NPSM inlet fitting
• 2-1/2" (6.4 cm) showerhead diameter
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAPMO/cUPC
• IPC
• Energy Policy Act of 1992
• All applicable US Federal and State material regulations
Product Specication:
The Handshower shall be of solid brass construction. Handshower shall have a single function spray pattern incorporating a finished
spray surface and rubber nozzles to facilitate easy cleaning. Handshower shall incorporate twin back-check valves within the handle.
Handshower shall have a 1/2" NPSM inlet fitting and 2-1/2" (6.4 cm) showerhead diameter while operating at 2.0 gallons (7.6 liters) per
minute maximum flow rate. Handshower shall be Newport Brass Model 283-5/___.
Add "Color / Finish" sufx to Model number, below.
Colors / Finishes
15:
15A:
26:
10B:
Polished Nickel
Antique Nickel
Polished Chrome
Oil Rubbed Bronze
• Other: Refer to the Newport Brass catalog for
additional color/nish options.
©2011 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
Specied Model
Model Description Colors / Finishes
283-5 Handshower
15
15A
26 10B Other