Installation Guide

ManualsBrandsNewport Brass ManualsTub Filler FaucetsNewport Brass Alexandria Triple Handle Deck Mounted Roman Tub Filler with Handshower and Metal Lever Handles

Table 1

SERIES

877

887

897

907

957

967

1027

1057(F)

1067(F)

1077

1087

1097

1107

1607

1627

1647

1667

1747

STEM

LENGTH

2-3/8"

2-7/16"

2-1/4"

2-3/8"

2-1/4"

2-7/16"

2-5/8"

2-1/2"

2-5/8"

2-1/2"

1-7/8"

2 1/4"

2 1/16"

2 3/16"

Trim Installation

Note:To achieve desired handle rotational alignment, the cartridge MUST be tightened in a clockwise

rotation only.

(Cartridge Bonnet factory torque is 14-16 ft-lbs.)

1.Attach handle and diverter trim to valves. Any adjustments for rotational alignment must be made

to the valve body - not to the cartridge. (Note:Allow minimum spacing between handles and

escutcheon/bonnet to prevent damage to the surface finish.) Secure handles into place with

setscrew.

2.Apply Teflon tape to spout nipple and install into base of spout. Slide spout nipple into quick con-

nect deck flange (re-grease if necessary). Make sure spout is flush with deck and secure into place

with setscrew. See Fig. 3

3.Turn on water supply, check for leaks and make any final adjustments required.

Set screw

Bonnet**

Shroud**

Escutcheon**

Spout

Spout nipple w/ O-rings

Decorative ring

Valve

Quick connect Deck

flange w/ spacer

Threaded Deck Flange

Handle shower

Handle

** Optional item based on model selected

Fig. 3

Decorative Nut**

02/28/06