Installation Guide

ManualsBrandsNewport Brass ManualsTub Filler FaucetsNewport Brass East Square Triple Handle Deck Mounted Roman Tub Filler with Handshower and Metal Cross Handles

Table 1

Trim Installation

Note:To achieve desired handle rotational alignment, the cartridge MUST be tightened in a clockwise

rotation only.

(Cartridge Bonnet factory torque is 14-16 ft-lbs.)

1.Attach handle and diverter trim to valves. Any adjustments for rotational alignment must be made

to the valve body - not to the cartridge. (Note:Allow minimum spacing between handles and

escutcheon/bonnet to prevent damage to the surface finish.) Secure handles into place with

setscrew.

2.Apply Teflon tape to spout nipple and install into base of spout. Slide spout nipple into quick con-

nect deck flange (re-grease if necessary). Make sure spout is flush with deck and secure into place

with setscrew. See Fig. 3

3.Turn on water supply, check for leaks and make any final adjustments required.

2/28/2006

Bonnet**

Escutcheon**

Spout

Spout nipple w/ O-rings

Decorative ring**

Valve

Quick connect Deck

flange w/ spacer

Threaded Deck Flange

Handle shower

Handle

** Optional item based on model selected

Fig. 3

Set screw

SERIES

807

817

827

837

843

847

857

917

927

937

987

997(L)

1407(L)

1007

1207

1037

1507

2017

2027

2107

STEM

LENGTH

2-1/2"

2-3/4"

2-1/4"

2-3/4"

2-1/2"

2-3/8"

2-3/4"

2-1/4”

2-1/4"

2 7/16”

2-1/4"

2-1/4”

2-1/8"

2-7/16"

2-1/2"

2-1/4"