Installation Guide

ManualsBrandsNewport Brass ManualsTub Filler FaucetsNewport Brass Miro Double Handle Deck Mounted Roman Tub Filler with Metal Lever Handles

2/28/06

Trim Installation

Note:To achieve desired handle rotational alignment, the cartridge MUST be tightened in a clockwise rota-

tion only. (Cartridge factory torque is set @ 14-16 ft-lbs.)

4. Attach handle trim to valve. When possible, any adjustments for rotational alignment should be made to the

valve body - not to the cartridge. (Note:Allow minimum spacing between handles and escutcheon/bonnet to

prevent damage to the surface finish.) Secure handles into place with setscrew. See Figure 3.

5. Apply Teflon tape to spout nipple and install into base of spout. Slide spout nipple into quick connect deck

flange (re-grease if necessary). Make sure spout is flush with deck and secure into place with setscrew. See

Figure 3.

6. Turn on water supply, check for leaks and make any final adjustments required.

Fig. 3

** Optional item based on model selection

Spout nipple

w/ o-rings

Decorative ring**

Quick connect

Deck flange &

spacer

Shroud **

Handle

Setscrews

Spout

Valve

Bonnet **

Escutcheon **

SERIES

876

886

896

906

956

966

1026

1056

1066

1076

1086

1096

1106

1606

1626

1646

1666

1746

STEM

LENGTH

2-3/8"

2-7/16"

2-1/4"

2-3/8"

2-1/4"

2-7/16"

2-5/8"

2-1/2"

2-5/8"

2-1/2"

2-1/4"

2-1/16"

2-3/16"

TABLE 1