User guide

INSTALLATION INSTRUCTIONS

ROMAN TUB 2 VALVE TRIM

Valve Model No: 1-547

Trim Kit for Model No: 1686

Congratulations on the purchase

of this Newport Brass product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

PAGE 1
INSTALLATION INSTRUCTIONS ROMAN TUB 2 VALVE TRIM Valve Model No: 1-547 Trim Kit for Model No: 1686 Congratulations on the purchase of this Newport Brass product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Rough in valve Installation Recommended Installation by a Professional Plumbing Contractor Note: Use plumbers tape or equivalent to seal all threaded joints. Warning: To prevent severe damage to valve body, any solder/braze process must be performed a min. of 4" from ports. 1. Install the quick connect spout shank through center hole of mounting surface. Secure with washer nut. (See Fig. 1) 2. Place washer nut on valve body. Insert body, (blue cold & red hot), through hole from below mounting surface.
PAGE 3
Trim Installation Note: To achieve desired handle rotational alignment, the cartridge MUST be tightened in a clockwise rotation only. The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. (Cartridge Bonnet factory torque is 14-16 ft-lbs.) 1. Attach handle trim to valve. When possible, any adjustments for rotational alignment should be made to the valve body - not to the cartridge.