Installation Sheet

INSTALLATION INSTRUCTIONS

COLD WATER DISPENSER

Model No’s:

106C, 107C, 108C, 1030-5623,

2470-5623, 1200-5623, 2940-5623, 2500-5623,

3170-5623, 3200-5623, 3210-5623,

3160-5623, 3180-5623, 3190-5623

Congratulations on the purchase

of your Brasstech product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

106C

PAGE 1
INSTALLATION INSTRUCTIONS COLD WATER DISPENSER Model No’s: 106C, 107C, 108C, 1030-5623, 2470-5623, 1200-5623, 2940-5623, 2500-5623, 3170-5623, 3200-5623, 3210-5623, 3160-5623, 3180-5623, 3190-5623 106C Congratulations on the purchase of your Brasstech product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Recommended Installation by a Professional Plumbing Contractor Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. Recommended deck thru hole Ø 1.25" to Ø1.38 INSTALLING FAUCET ON SINK (See Fig 1) · Place the faucet inlet and mounting stud through escutcheon, o-ring, and mounting surface hole.
PAGE 3
ATTACHING WATER SUPPLY CONNECTION (See Fig 2) · Slide the 1/4” OD supply tube (not included) through compression nut and compression sleeve. Place insert into end of tube. · Insert the end of tube into faucet inlet and thread compression nut onto the end of inlet. Faucet inlet Insert Compression sleeve Compression nut 1/4” OD Tubing (not included) Connect to water supply (not included) Figure 2 3.