Installation & Assembly

7. With faucet in the OFF position, open water supply valves. Inspect connections under sink for leaks.
DO NOT turn faucet on yet.
8. Pull SPRAYHEAD (5) out from SPOUT (4). While holding HOSE (6),
detach SPRAYHEAD (5). Aiming HOSE (6) into sink, turn on faucet to
center position (mixed) and flush for one minute to remove debris
from lines.
9. Turn OFF faucet and reattach SPRAYHEAD(5) to HOSE(6).
See Figure 5.
10. Check the SPRAYHEAD(5) by operating the trigger from
aerator to spray.
2001 CARNEGIE AVE, SANTA ANA CA 92705
[phone]
WWW.NEWPORTBRASS.COM
NWP-3200-5113
EN-3076
REV -
5
Figure 5
05/22/17
6
4
ORDER 12494
FOR 3200-5223
Figure 6 - Spare Parts