User Manual

Towel Ring, Hook & Open Towel/Tissue Holder
Installation Instructions
Model No. 34-09, 34-12, 34-13, 34-27, 35-09, 35-12, 35-13, 35-27
Recommended Installation by a Professional Contractor
1. Drill hole in wall at points marked using the appropriate drill size:
· Wood Screw (#6 x 2”) - use: 3/32" Drill
· Toggle Screw (6-32 x 3”) - use: 3/8" Drill
2. Fasten FLANGE (1) to wall using either WOOD/TOGGLE SCREW (3). Engage
POST (2), into FLANGE (1). Complete engagement of POST (2) height is 2" from
mounting surface. Secure POST (2), into place by tightening SETSCREW (4), on
FLANGE (1). (See Fig. 1)
3. Place ESCUTCHEON (3), onto FLANGE (1), place BONNET (4) over POST (2)
and against ESCUTCHEON (3). (See Fig. 2)
4a. Garment Hook: Slide END POST (1) into BONNET (3). Secure into place with
SCREW (4). Place O-RING (5) onto END CAP (6) and press into END POST (1).
(See Fig. 3 & 4)
4b.Towel / Tissue Holder: Slide END POST (1) into BONNET (3). Secure into
place with SCREW (4). Place O-RING (5) onto END CAP (6) and press into END
POST (1). (See Fig. 5 & 6.)
2”
Fig. 1
Fig. 2
2
4
1
4
3
1
2
[phone]
AMS-34-09 Santa Ana CA 92705 6/16/2010
www.brasstech.com
3
1
3
1
4
3
1
3
4
6
5
6
5
Fig. 4
Fig. 5
4
5
6
Fig. 3
Fig. 6
1
3
4
6
5