Installation Guide

ManualsBrandsNewport Brass ManualsShower ComponentsNewport Brass Kiara Single Handle Balanced Pressure Shower Trim with Metal Lever Handle

COMPLEMENT THIS PRODUCT WITH THESE

COORDINATING ACCESSORIES:

CIRCE

™

INSTALLATION INSTRUCTIONS

BALANCED PRESSURE SHOWER TRIM

sconce lights

•

mirrors

•

towel bars and rings

•

toiletry shelves and trays

toilet tissue holders

•

robe hooks

•

hotel shelves

•

grab bars

soap dishes and dispensers

•

tumblers

•

toothbrush holders

•

curtain rod holders

MODEL w/ CROSS HANDLE: G27-004

MODEL w/ LEVER HANDLE: G27-104

US D520,606 S. US D524,905 S.

Summary of content (4 pages)

PAGE 1
CIRCE ™ I N S TA L L AT I O N I N S T R U C T I O N S BALANCED PRESSURE SHOWER TRIM MODEL w/ CROSS HANDLE: G27-004 MODEL w/ LEVER HANDLE: G27-104 COMPLEMENT THIS PRODUCT WITH THESE COORDINATING ACCESSORIES: sconce lights • mirrors • towel bars and rings • toiletry shelves and trays toilet tissue holders • robe hooks • hotel shelves • grab bars soap dishes and dispensers • tumblers • toothbrush holders • curtain rod holders US D520,606 S. US D524,905 S.
PAGE 2
We recommend Installation of this product by a Professional Plumbing Contractor Note: The use of petroleum based plumber’s putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. All trim must be installed on finished wall surface. Valve Trim Installation (Reference Figure 1) Prior to proceeding, it is recommended to turn off water supply to valve.
PAGE 3
Shower Head Installation (Reference Figure 2) Based on finished wall thickness, installer must use an appropriate length 1/2” NPT NIPPLE (1), not included, for shower ARM (3) installation. Apply thread sealant to the threads of the NIPPLE (1) and thread into fitting behind finished wall. Attach shower ARM (3) to other end of NIPPLE (1). Turn on water supply, check for leaks and make any final adjustments required. Open valve and flush shower line of debris. Attach shower HEAD (2) to shower ARM (3).
PAGE 4
Ginger® Product Care Simple care is all that is needed in maintaining this product. Abrasive cleansers, detergents and silver or brass polish may result in damage to the finish and therefore should not be used. To clean, simply wipe with a soft, water-dampened cloth. Ginger hand, deck and wall shower sprays feature easy-cleaning jets. The jets should be cleaned periodically by rubbing your thumb or a damp cloth across the jets to loosen mineral deposits.