Installation & Assembly

INSTALLATION INSTRUCTIONS

CENTER SET BAR FAUCET

MODEL No: 808, 2018

Congratulations on the purchase

of this Newport Brass product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

PAGE 1
INSTALLATION INSTRUCTIONS CENTER SET BAR FAUCET MODEL No: 808, 2018 Congratulations on the purchase of this Newport Brass product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Recommended Installation by a Professional Plumbing Contractor Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. Recommended deck thru hole Ø 1.25". 1. Place the spout assembly SHANK (1) through holes of mounting surface. Secure into place with flange NUT (2). See Figure 1. 2.Connect hot/cold water supply to appropriate spout SHANK (1), utilizing one of the three following types of risers.
PAGE 3
4 5 1 b 3 6 4 4” 2 a Figure 1 NWP-808 Figure 2 (949)417-5207 Santa Ana, Ca. 92705 www.brasstech.