Installation

INSTALLATION INSTRUCTIONS

BAR FAUCET

Model No's:

8081, 8181, 8781, 8881, 8901, 9081,

9181,9281, 9881, 1008, 1038, 1068,

1078, 1098, 1208, 1608, 1628, 1648,

1668, 1688, 1708, 1728

Congratulations on the purchase

of your Newport Brass product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

PAGE 1
INSTALLATION INSTRUCTIONS BAR FAUCET Model No's: 8081, 8181, 8781, 8881, 8901, 9081, 9181,9281, 9881, 1008, 1038, 1068, 1078, 1098, 1208, 1608, 1628, 1648, 1668, 1688, 1708, 1728 Congratulations on the purchase of your Newport Brass product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Recommended Installation by a Professional Plumbing Contractor Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. 1. Drill hole in mounting surface. Recommended deck hole Ø1.25” not to exceed Ø1.50”. 2. Place O-ring on underside of faucet body. See Fig. 1. 3. Insert Hoses and Threaded Rod through hole in mounting surface. Threaded Rod to be oriented to the rear of faucet, toward the wall. See Fig. 1. 4.
PAGE 3
Faucet body O-ring Deck hole Ø1.25” Gasket Cresent Figure 1 Mounting Nut Riser (not included) Hot water supply (not included) 3/8” COMPRESSION OUTLET Figure 2 NWP-8081 (949) 417-5207 Santa Ana, CA 92705 www.brasstech.