Installation & Assembly

Figure 5
7. With faucet in the OFF position, open water supply valves. Inspect connections under sink for leaks.
DO NOT turn faucet on yet.
8. Pull SPRAYHEAD (5) out from SPOUT (4). While holding
HOSE (6), detach SPRAYHEAD (5). Aiming HOSE (6) into
sink, turn on faucet to center position (mixed) and flush for
one minute to remove debris from lines.
9. Turn OFF faucet and reattach SPRAYHEAD (5) to HOSE (6).
See Figure 5.
10. Turn on faucet and check the SPRAYHEAD (5) by operating
the trigger from aerator to spray.
5
6
4
NWP-8200-5103 2001 CARNEGIE AVE, SANTA ANA CA 92705 02/01/18
Rev NC [phone] EN-3528
WWW.NEWPORTBRASS.COM