Installation Sheet

SINGLE HOLE VESSEL / BAR FAUCET

INSTALLATION INSTRUCTIONS

Model No: 9208

Congratulations on the purchase

of this Newport Brass product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

PAGE 1
SINGLE HOLE VESSEL / BAR FAUCET INSTALLATION INSTRUCTIONS Model No: 9208 Congratulations on the purchase of this Newport Brass product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Recommended Installation by a Professional Plumbing Contractor Note:The use of petroleum base plumbers putty on our products will nullify the warranty.We recommend the use of clear silicone sealing materials. Recommended deck thru hole Ø 1.38" 1. Place the spout hoses, one at a time, and mounting rod through mounting surface. Secure spout into place with mounting bracket and nut. See Fig. 1 2. Attach hot/cold spout supply hoses to appropriate supply lines and valves in the wall.
PAGE 3
Figure 1 ½” NPT Supply lines (not included) Wall valves (not included) Figure 2 2/22/10
PAGE 4
Newport Brass Product Care Newport Brass faucets and bath fittings are made of solid brass and are of the finest quality. To maintain the finish on these items, please: • Do not use any abrasive cleaners, detergents, brass or silver polish which will scratch the surface. • Clean with a soft damp cloth. Applying a coating of a non-abrasive liquid wax to the clean surface of the product will keep it looking beautiful. Brass ProTech, a product of Brasstech, Inc.