Other

Clear Protective Coated Finishes
(Weathered Brass-03W, Aged Brass-034, Antique Brass-06, English Bronze-07, Polished Copper-08, Antique Copper-08A,
Hand Relieved Oil Rubbed Bronze-ORB, Venetian Bronze-VB, Gun Metal-14, Antique Nickel-15A)
Even though these finishes are equipped with a clear protective coating they are susceptible to damage. If the topical
clear coat is scratched or chipped the base material will be exposed and may oxidize. Use of abrasive cleaners or pads
may remove the protective coating and damage the finish. Periodic cleaning can be done by applying Brass ProTech
(98000) with a soft clean cloth to gently remove surface spots.
Natural Nickel Finishes
(Polished Nickel-15)
Brasstech’s polished nickel finish is specifically designed to highlight the natural beauty of the base material. As such, it
has NO PROTECTIVE COATING to protect the nickel plating. The result is a beautiful, deep finish that will maintain its
brilliance with regular maintenance. This finish may oxidize over time. Should oxidation occur, periodic cleaning can be
done by applying Brass Protech (98000) with a soft clean cloth to gently remove surface spots.
24K Gold Finishes
(Satin Gold-24S)
This finish is created by plating real precious metal gold over the brass base material. The resulting finish is soft and has
NO PROTECTIVE COATING to protect the delicate surface. As a result, it can be easily scratched or scuffed if it is not
cared for properly. Treat gold plated faucets and fittings like you would fine jewelry and avoid any type of astringent or
abrasive cleaner as well as abrasive pads, cloths, or sponges. Clean with great care as some or all of the gold plating can
be removed if any type of polish is used. Periodic cleaning should be done with mild liquid soap only. Wipe gently with
a soft, clean cloth.
Living Finishes
(Polished Brass, Uncoated-03N, Weathered Copper-08W)
Living Finishes have NO PROTECTIVE COATING so they are very delicate and can easily be scratched or scuffed if not
cared for properly. The unique characteristic of these finishes is that they wear and age over time. Essentially, the finish
replicates what nature would do to the surface material naturally when exposed to the elements. These products will
generally tend to darken slightly on the areas that are infrequently touched and lighten or highlight on the areas that are
contacted on a consistent basis. Soaps, acidic fluids, and astringent cleaners can damage the finish. Avoid using
abrasive pads, sponges, or cloths to clean the product. Do not allow water spots to dry on the fixture. Brasstech initially
applies a wax coating to the finish surface to help protect and prevent the finish from oxidizing prior to installation.
Periodic cleaning can be done by using a micro-crystalline wax (Renaissance Wax is recommended). Apply the wax with
a soft tissue or cloth and gently buff the wax with a soft clean cloth to remove surface spots and add a protective coating
to the finish.
Page 2 of 2 • 9/15 • revA