Installation Sheet

Recommended Installation by a Professional Plumbing Contractor

Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend

the use of clear silicone sealing materials. Recommended deck hole 2 @ Ø1.25 and 7 1/4” apart - center to

center.

1. Place threaded SHANKS (1) through deck holes and fasten with steel WASHER (2), rubber WASHER (3) and

mounting NUT (4). See Figure 1.

2.Thread hand shower RISER (5) to faucet BODY (6). See Figure 2.

3. Attach the flex HOSE (7) to RISER (5) and hand SHOWER (8). (Hand-tighten and secure each connection

with a wrench ¼ turn.) See Figure 3.

4. Connect hot/cold water supply to appropriate 3/4” NPSM valve BODY (6), utilize adapter 11068 if 3/4 NPT

is required. Supply risers not included. See Figure 3. For exposed installation see Figure 4.

5. Check for leaks and make any final adjustments required.

NWP-933

Figure 1

REV. C