Spec Sheet
t: 949.417.5207 l www.newportbrass.com
©2020 Brasstech, Inc.
Handshower Set Mount for 1-1/4" Dia. Grab Bars
Features
• Converts any ADA grab bars into Handshower w/ Slidebar Set
• Compatible with all Newport Brass / Ginger Grab bars
• Fully adjustable (height and angle)
• Multi-function handshower engine with 3 spray modes
• Rubber nozzles facilitate easy cleaning
• 59” [149.9 cm] spiral shower hose
• 1/2” NPT inlet elbow fitting
• 4” (10.2 cm) showerhead diameter
• 1.8 GPM (6.8 LPM) Max
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1-18
• IAMPO/cUPC
• IPC
• Energy Policy Act of 1992
• EPA WaterSense
• California Energy Commission
• ASME A112.18.3 (Back Flow)
• All applicable US Federal and State material regulations
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel - PVD
• 26: Polished Chrome
• Other: Refer to the Newport Brass
catalog for additional color/finish options.
990-0442
NEWPORT BATH
15S
10B 26 Other15
Specied Model
Model Description Colors | Finishes
990-0442 Handshower Slider Kit for Grab Bar
Page 1 of 2 Spec_990-0442_a_1.21
EN-4300k
Product Specication Add “Color / Finish” sufx to Model number, below.
The Handshower set mount shall be of solid brass construction while incorporating a non-metallic handshower engine. Handshower
shall have a multi-function shower engine with 3 spray modes incorporating rubber nozzles to facilitate easy cleaning. Handshower
shall incorporate twin back-check valves within the handle. Handshower Set shall have a 1/2” NPT inlet elbow fitting and 4” (10.2 cm)
showerhead diameter while operating at 1.8 gallons (6.7 liters) per minute maximum flow rate. Handshower Set is intended for use with
1-1/4” [3.175 cm] diameter tube. Handshower set mount shall be Newport Brass Model 990-0442/___. Required accessory Grab Bar
shall be Newport Brass Model ____0-39___/____.
page 1 of 2 spec_
Product Specication:
Add "Color / Finish" sufx to Model number, below.
Features
• Solid brass construction
• Brass valve bodies
• Quarter-turn washerless ceramic disc valve cartridges
• ADA compliant traditional cross handles
• Spout assembly with integral supply hoses
• Pop-up drain with tailpiece
• 1-7/16" (3.7 cm) spout height at outlet
• 5-5/8" (14.3 cm) spout reach (c-c)
• For 8" (20.3 cm) centers - Maximum 20" (50.8 cm)
• 1.5 gallons (5.7 liters) per minute maximum flow rate
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAPMO/cUPC
• IPC
• NSF 61
• ADA
• ICC/ANSI A117.1
• Energy Policy Act of 1992
• All applicable US Federal and State material regulations
• EPA WaterSense
®
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for
additional color/nish options.
Specied Model
Model Description Colors / Finishes
920 Widespread Lavatory Faucet
10B 15 15S 26 Other
©2012 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com920_rev-a
920
ASTOR
The two-handle Widespread Lavatory Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with
integral supply hoses and feature brass valve bodies with quarter-turn washerless ceramic disc valve cartridges. Faucet shall have a
1.5 gallon (5.7 liter) per minute maximum flow rate. Product shall be for 8" (20.3 cm) centers - Maximum 20" (50.8 cm). Product shall
incorporate a 1-7/16" (3.7 cm) spout height at outlet and a 5-5/8" (14.3 cm) spout reach (c-c). Faucet shall include a pop-up drain with
tailpiece and incorporate ADA compliant traditional cross handles. Widespread Lavatory Faucet shall be Newport Brass Model 920/____ .
Widespread Lavatory Faucet