Datasheet

8
NS-211Micro-USB
Hot-Key Commands
Operation
Controlling your computers with the NS-211Mirco-USB is fast and easy.
The NS-211Mirco-USB allows you to access the computers by using
simple Hot Key commands from the keyboard (PC only) or from the push
button (PC and Mac).
Selecting Computers
You can change ports on the switch through the simple keyboard
command sequence using the “SCROLL LOCK” key.
To invoke the Hot key mode, press the “SCROLL LOCK” key twice within
two seconds to switch to the next port.
★�For Mac . use push button to change ports. ★
Auto Scan Mode
The Auto Scan feature allows you to monitor the activity of the connected
computers at regular intervals without manually switching. (Note: This
time interval cannot be changed.)
To invoke Auto Scan Mode, press [SCROLL LOCK] + [SCROLL LOCK] +
[SCROLL LOCK] + [SCROLL LOCK]
NOTE:
1.The interval between these four keys should be no more than 1.5
seconds. Once the scanning begins, it continues until you press
[SCROLL LOCK] + [SCROLL LOCK] to exit the Auto Scan Mode.
2.While the Auto Scan Mode is in effect, the keyboard and mouse will be
DISABLED except for the [SCROLL LOCK] key. To exit the Auto Scan
Mode, press the [SCROLL LOCK] key twice.