Datasheet

5
NS-211Micro-USB
Hardware Installation
Step-by-Step Installation
This manual provides you complete setup instructions for the hardware
installation of the NS-211Micro-USB.
Before you begin, please turn off all the computers that you are going to
connect to the NS-211Micro-USB. Plugging and unplugging cables while
computers are powered on might cause irreversible damage to your
computers, data, and/or your switch, NEWSTAR will not be responsible
for such damages.
You will need the following items to install the Switch:
2-Port KVM Switch with Built-In Cabling
One USB keyboard, USB mouse, and monitor.
Connecting the Console
1.Power off all computers.
2.Connect your monitor VGA cable to the female VGA port on the front
panel of the switch.
