User manual

Console Monitor
Console PS/2
Keyboard
Console PS/2 Mouse
Hardware Installation
Please follow the steps below closely and in the order as
shown, otherwise keyboard and/or mouse errors may occur.
Before connecting your computers and console devices to
the NS-211K, make sure that everything is powered off.
Connecting devices while power is not off may cause damage
to your computers or the NS-211K. NEWSTAR Europe will
not be held responsible for damages caused in the manner.
1. Place the NS-211K in a convenient location, its small size
makes it easy to place on a desktop. Take the length of the
cables in consideration while placing the KVM switch unit.
2. Connect the console devices first. Connect our monitor to
the NS-211K The 15-pin connector coming from your
monitor must be inserted into the unit on the rear panel.
Connect it to the 15 pin HDDB connector labeled
'MONITOR'.
3. Connect your PS/2 keyboard and PS/2 mouse to the rear
panel of the NS-211K. The connections should be made to
the two 6-pin Mini DIN connectors labeled keyboard &
mouse as shown below.
Hardware Installation
The layout of the front, side, and rear panels are shown
below.
Front Panel Layout
Rear Panel Layout
Side Panel Layout
3 4
NS-211K NS-211K