User manual

Hardware Installation
4. Connect a VGA cable (15-pin HDDB Male / Male) with the
Male side to both the PC and the rear panel of the NS-211K
unit to the connector labeled VGA. Repeat this for all PCs.
5. Connect a mouse cable (6-pin Mini DIN Male / Male) to the
PC and the rear panel of the NS-211K unit to the connector
with the mouse symbol. Repeat this for all PCs.
Hardware Installation
6. Connect a keyboard cable (6-pin Mini DIN Male / Male) to
the PC and the rear panel of the NS-211K unit to the
connector with the keyboard symbol. Repeat this for all
PCs.
7. Now make sure to verify all cables. Keyboard and mouse
cables should be checked carefully because they are
easily switched due to use of the same type of connector.
8. Attach the power supply to the NS-211K unit and plug it
into a power supply. Now you will see the LED for Port 1
light up, and you will hear a beep. Switch on your monitor.
9. Now power up all computers simultaneously, the first
computer will be shown on the monitor. You may check if
the mouse and keyboard work after the system has
booted up.If this is OK, use the Select button to select the
other computer and verify the functionality in the same
way. In case you find errors, first check all cables for
proper connections.
DC9V, 600mA Adapter(optional)
5 6
NS-211K NS-211K