User manual

-5- -6-
Hardware Installation
3.Connect your speakers to the SPEAKER IN on the console of
NS-211KAR.
4.Connect the microphone's cable of the microphone to the MIC
IN on the console NS-211KAR.
5.We recommend using NEWSTAR's all-in-one cable series, whe
Connecting between the NS-211KAR and computer, this will
ensure the NS-211KAR operates with high performance.
Connect the VGA port of computer using the male end of the
cable, and the other end of the cable connects to PC1 of the
NS-211KAR.
Microphone
MIC Connector
Hardware Installation
6.Connect keyboard and mouse port using All-in-one cable to the
end of both side of the computer and PC1 of the remote KVM
switch. Repeat steps 5 and 6 for another one computer.
7.Using Audio/Microphone cable (Recommend to use NEWSTAR
series audio cables.) to connect the jacks there are marking the
SPEAKER OUT and MIC OUT on your computer or sound card.
Speaker
Speaker Connector
Printersereal
VGA Port
Printersereal
Keyboard/Mouse Port
Audio/MIC Port
NS-211KAR NS-211KAR
8.Attach the power supply to the NS-211KAR unit and plug it into
the mains. Now you will see the LED for Port 1 light up, and
you will hear a beep.Switch on your monitor.
9.Now power up all computers simultaneously, the first computer
will be shown on the monitor. You may check if the mouse and
keyboard work after the system has booted up.If this is OK, use
the Select button to select the other computer and verify the
functionality in the same way.In case you find errors, first check
all cables for proper connections.
DC12V, 1A adapter