User manual
12
NS-231 / 431
13
NS-231 / 431
Using Your Switch
Switch Hot Key Command
The following combinations are available for Hot Keys:
[Ctrl][Ctrl](default), [Alt][Alt],[Scroll Lock][Scroll Lock],[Shift][Shift]
1. Press the original command key twice within two seconds
2. Press the new command Hot key.
For example; [Ctrl] + [Ctrl] + [Alt].Now the Hot Key will charged to Alt
The Hot Key Command
X = 1,2,3,4)
NOTE: After switching ports, there will be a delay of up to 1-2 seconds
before the video displays. This is normal to refresh the rate of the
video signal.
C
X
S
FAQs
Q:Do I have to install any software to use the Switch?
A: No, the Switch does not need any drivers or software. Simply connect
////all your computers to the PC ports on the Switch, attach one monitor,
////mouse, and keyboard to the corresponding console ports, then your
////Switch is ready for use.
Q: What operating system does the Switch support?
A: The Switch will support any operating system that runs on a PS/2
////platform. It will also work with Sun and Mac operating systems by
////using the appropriate adapters (For more details, please call for Sun &
Mac Adapters). Operating systems include, but not limited to,Windows
®
98, 2000, ME, NT, XP, Linux, and Novell Netware 4.x/5.x.
Q: Does the Switch function with the Microsoft IntelliMouse?
A: Yes, the Switch function with Microsoft, Logitech, Kensington, as
////well as all other mice.
Q: How does the Switch allow the user to switch between ports?
A: The user can choose computers using special designated hot key
////function from the keyboard or using the push button in the front panel
////to switch port.
Q: What is the maximum video resolution the Switch supports?
A: The advanced video circuit in the Switch supports a maximum
////resolution of 2048x1536. This higher resolution support is ideal for
////graphic artists and designers who depend on high-quality video.