T ABLE OF CONTENTS INTRODUCTION ------------------------------------------------- P1 FEATURES -------------------------------------------------------- P1 SPECIFICATIONS------------------------------------------------ P2 PACKAGE CONTENTS------------------------------------------ P2 HARDWARE INSTALLATION----------------------------------- P3 FRONT PANEL LAYOUT----------------------------------------- P3 REAR PANEL LAYOUT ------------------------------------------ P3 HARDWARE INSTALLATION----------
NS-411K NS-411K Introduction Specifications Thank you for purchasing the NEWSTAR KVM Switch, this product will ensure easy and accurate control over 4 PCs through a single console. The KVM Switch is compatible with PS/2 style computers and comes with advanced features. It has keyboard and mouse emulation for error free boot-ups and support is also provided for the Microsoft Intellimouse. The KVM Switch supports high resolutions up to 2048 x 1536 without any deterioration of the image quality.
NS-411K NS-411K Hardware Installation Hardware Installation The layout of front and rear panel are shown below. Front Panel Layout Please follow the steps below closely and in the order as shown, Otherwise keyboard and/or mouse errors may occur. Before connecting your computers and console devices to the NS411K, make sure that everything is powered off. Connecting devices while power is not off may cause damage to your computers or the NS-411K.
NS-411K NS-411K Hardware Installation Hardware Installation 4.Connect a VGA cable (15-pin HDDB Male/ Male) with the Male side to both the PC and the rear panel of the NS-411K unit to the connector labeled VGA. Repeat this for all PCs. VGA PORT 5.Connect a mouse cable (6-pin Mini DIN Male/ Male) to the PC and the rear panel of the NS-411K unit to the connector with the mouse symbol. Repeat this for all PC. 6.
NS-411K NS-411K Using the NS-411K The NS-411K switch unit provides two ways to select which computer is the active system. Use either the Select button on the unit, or make use of the keyboard Hot key commands. You may notice that the mouse can not be used for around 2 seconds when the NS-411K switches to another computer. This is normal and is caused by synchronization that makes sure the mouse operates properly. In Auto-Scan mode the NS-411K unit will switch to the next computer every 10 seconds.
NS-411K NS-411K Troubleshooting Keyboard My keyboard is not detected, or a keyboard error is given during boot-up. 6 Please verify that the keyboard cables are inserted properly. 6 Check to make sure that the power cord is plugged in and is working roperly. The computers all boot up properly, but the keyboard is not functional. 6 Make sure the keyboard is plugged into the NS-411K unit properly. 6 Verify that the keyboard works when plugged into the computer directly.
NS-411K NS-411K Video The image on my monitor is not clear. 6 Please verify that all video cables are inserted properly. 6 It may be that your resolution or refresh rate is too high. Try a lower refresh rate, or try lowering the resolution. 6 Your video cable may be too long. Video signals are high frequency signals and are therefore subject to interference. Please use video cables that are as short as possible. 6 Make sure that the power adapter is plugged into the mains and that it is working correctly.
NS-411K FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
NS-411K NS-411K for which the purchase price is refunded, shall become the property of NEWSTAR upon replacement or refund. Governing Law: This Limited Warranty shall be governed by the Haarlem, city of The Netherlands. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply.
