Specifications

Hardware Installation
The layout of front and rear panel are shown below.
Front Panel Layout
Rear Panel Layout
Console Monitor
Console PS/2 Keyboard
Console PS/2 Mouse
NS-411K NS-411K
-3- -4-
Hardware Installation
Please follow the steps below closely and in the order as shown,
Otherwise keyboard and/or mouse errors may occur.
Before connecting your computers and console devices to the NS-
411K, make sure that everything is powered off. Connecting
devices while power is not off may cause damage to your
computers or the NS-411K. NEWSTAR Corporation will not be held
responsible for damage caused in this manner.
1.Place the NS-411K in a convenient location, its small size makes
it easy to place on a desktop. Take the length of the cables in
consideration while placing the KVM switch unit.
2.Connect the console devices first. Connect your monitor to the
NS-411K. The 15-pin connector coming from your monitor must
be inserted into the unit on the rear panel. Connect it to the 15 pin
HDDB connector labeled 'MONITOR' as shown below.
3.Connect your PS/2 keyboard and PS/2 mouse to the rear panel
of the NS-411K. The connections should be made to the two 6-
pin Mini DIN connectors Labeled 'CONSOLE' as shown below.