Specifications

VGA PORTVGA PORT
9V, 600mA Adapter(optional)
NS-411K NS-411K
-5- -6-
Hardware Installation
4.Connect a VGA cable (15-pin HDDB Male/ Male) with the Male
side to both the PC and the rear panel of the NS-411K unit to the
connector labeled VGA. Repeat this for all PCs.
5.Connect a mouse cable (6-pin Mini DIN Male/ Male) to the PC
and the rear panel of the NS-411K unit to the connector with the
mouse symbol. Repeat this for all PC.
Hardware Installation
6.Connect a keyboard cable (6-pin Mini DIN Male / Male) to the
PC and to the rear panel of the NS-411K unit to the connector
with the keyboard symbol. Repeat this for all PCs.
7.Now make sure to verify all cables, keyboard and mouse cables
should be checked carefully because they are easily switched
due to use of the same type of connector. Repeat this for all
PCs.
8.Attach the power supply to the NS-411K unit and plug it into a
power supply . Now you will see the LED for Port 1 light up, and
you will hear a beep. Switch on your monitor.
9.Now power up all computers simultaneously, the first computer
will be shown on the monitor. You may check if the mouse and
keyboard work after the system has booted up. If this is OK,
use the Select button to select the other computer and verify
the functionality in the same way. In case you find errors, first
check all cables for proper connections.