User manual

12
NS-431
13
NS-431
Using Your Switch
Switch Hot Key Command
NEWSTAR’s 4-PORT Switch offers users to change the function key
from “Scroll Lock” to “Ctrl” for convenient use.
You can easily press “Scroll Lock” key twice within two seconds and then
press the “Ctrl” key to change the function key from “Scroll Lock” to “
Ctrl”. Also, you can change the function key back by just pressing “Ctrl
” key twice then press the “Scroll Lock”. Now, the “Scroll Lock” key again
become the function key.
The Hot Key Command
FAQs
Q:Do I have to install any software to use the Switch?
A: No, the Switch does not need any drivers or software. Simply connect
////all your computers to the PC ports on the Switch, attach one monitor,
////mouse, and keyboard to the corresponding console ports, then your
////Switch is ready for use.
Q: What operating system does the Switch support?
A: The Switch will support any operating system that runs on a PS/2
////platform. It will also work with Sun and Mac operating systems by
////using the appropriate adapters (For more details, please call for Sun &
Mac Adapters). Operating systems include, but not limited to,Windows
®
98, 2000, ME, NT, XP, Linux, and Novell Netware 4.x/5.x.
Q: Does the Switch function with the Microsoft IntelliMouse?
A: Yes, the Switch function with Microsoft, Logitech, Kensington, as
////well as all other mice.
Q: How does the Switch allow the user to switch between ports?
A: The user can choose computers using special designated hot key
////function from the keyboard or using the push button in the front panel
////to switch port.
Q: What is the maximum video resolution the Switch supports?
A: The advanced video circuit in the Switch supports a maximum
////resolution of 2048x1536. This higher resolution support is ideal for
////graphic artists and designers who depend on high-quality video.