NEWSTAR 4-PORT USB2.0 AUTO SWITCH Share a USB 2.0 Device with up to Four Computers User Manual www.newstar.
TABLE OF CONTENTS NTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P1 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P1 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P2 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . .P2 EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P3 OPERATING SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . .P3 DISPLAY DIAGRAMS . . . . . . . . . . . . . . . . .
NS-USB421A NS-USB421A Introduction Supports idle Time-out switching & Automatic printer shaing Congratulations on purchasing NEWSTAR's four port (NSUSB421A) USB 2.0 Auto Switch. Incorporating fast USB 2.0 technology (up to 480 Mbps) the Auto Switch allows up to four computers (PCs & Macs) direct access to a single USB (1.1/2.0) compliant device - such as a scanner, a printer, a digital camera or an external HDD.
NS-USB421A NS-USB421A Equipment Display Diagrams Cables To connect to the Auto Switch, each computer requires a USB device cable (A to B).The following Hi-Speed USB Device Cables are recommended for use with NEWSTAR's (NS-USB421A) Auto Switch. 1. LED Display NEWSTAR Hi-Speed USB (2.0) device cable (1.8m) Operating Systems NEWSTAR's USB Auto Switch is for use with computers running the following: LED Display Windows 98 SE, Me, 2000, XP Mac OS 2.
NS-USB421A NS-USB421A Software Installation 3. Computer Ports Before you begin, make sure that: 1.The Auto switch is not connected to your computers 2.The Auto Switch and your peripheral USB devices support your operating system Software Installation for Windows Users Computer Ports To install the software: 1.Insert NEWSTAR's software CD in your PC. 2.Double-click on "My Computer". 3.Double-click on the CD-ROM drive. 4.Double-click on the file named "USBShare.Ctl.exe" 5.
NS-USB421A NS-USB421A Hardware Installation Operation - Software Switching for Windows Users Connecting the Auto Switch 1.Connect the A-type connector cable of your USB device to the A-type USB port on the Auto Switch. 2.Install the drivers for your USB (1.1/2.0) device. Refer to the device's user manual for additional information on installing the driver. NEWSTAR's Auto Switch provides Windows users with AOD (Access-On-Demand) switching software.
NS-USB421A NS-USB421A Manual Switching NEWSTAR's (NS-USB421A) provides Mac and PC users with a fast and convenient switching solution. To manually access the connected USB device: 1.Using the push button port selector located on the front panel of the Auto switch, switch through to the desired USB port that corresponds to your computer. A LED will light red to indicate the active port. 2.
NS-USB421A NS-USB421A Troubleshooting FCC Certifications The Auto Switch does not detect my computer. 1.Check that the USB cable between the Auto Switch and the computer is properly connected. 2.Make sure the connected computer is not further than 15 feet away. 3.Check that the USB cable between the Auto Switch and the computer is no longer than 15 feet. 4.Try connecting the computer to a different port. 5.
NS-USB421A NS-USB421A You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired opera tion. CE Mark Warning This is a Class B product.
NS-USB421A NS-USB421A NEWSTAR's sole obligation shall be to repair or replace the defective Hardware at no charge to the original owner. Such repair or replacement will be rendered by NEWSTAR at an Authorized NEWSTAR Service Office.
NS-USB421A F AX: +31(0)23 547 88 89 Registration Card Print, type or use block letters. Your name:Mr./Ms___________________________________________ Organization:___________________Dept.
