Instructions / Assembly

36" Hybrid Composite Railing Installation Guide / v20170720 6
914 mm
(36")
Straight Railing
155 mm
(6.102")
DIAGRAM 1
DIAGRAM 2
DIAGRAM 4
DIAGRAM 6
DIAGRAM 5
DIAGRAM 7
DIAGRAM 3
1
Mark where the post mount (J-R0215-36)
will be installed. The maximum distance
of the post mount is 1923 mm (75.7") from
center to center as shown in diagram 1.
3
Install the post mount (J-R0215-36) as
shown in diagram 4.
Note: Screw WJ0094 is used when installed
on concrete. Screw WJ0096 is used when
installed on wood.
Install the post sleeve (N-UH35) as shown
in diagram 5.
4
Mark where the post brackets will be
installed with the "Straight Railing"
cardboard template as shown in diagram 6.
Use the top 4 holes for top post brackets
and use the bottom 2 holes for the bottom
post brackets as shown in diagram 7.
Note: The cardboard template location
should be measured from the boom.
Pre-drill post bracket holes with a 3 mm
(7/64 inch) bit.
2
Cut post mount (J-R0215-36) to the length
of 937 mm (36.9") as shown in diagram 2.
Cut post sleeve (N-UH35) to the length of
991 mm (39") as shown in diagram 3.