Installation Guide

Deck-A-Floor PRO Ending
During installation one might find that there deck’s length
doesn’t entirely quite match up with the DAF PRO Clip as
shown in Figure 31.
In this case, we recommend to add extra blocks of wood
to the frame as additions to the actual foundation to
ensure that the clip can rest on the joist firmly.
If one needs to end the deck abruptly and doesn’t have
anymore room. We recommend using our NewTechWood
color head screws with countersinking to fix down the
board.
Note: Because of the special design of the board that
comes along with the Deck-A-Floor PRO system, if there
is a need to cut the board the groove on that side will be
lost therefore the only way to end up fixing that side of
the board is by face fixing screws.
Figure 31
Figure 32