Installation Guide

Addition of sister joists
Board ends on own their joists
Figure 5
Deck-A-Floor PRO Clips
The Deck-A-Floor PRO clips will be used on the framing
and act as a extension of the joist for the board to fit into.
Installation:
1. Take one of the DAF PRO clips and mark the position
on the frame so it lines up with the very end of the clip
and then mark a line. You might need to trim/cut off the
dovetail connection on the ends to get them to
completely line up with the frame.
"
Continued on the next page.
Figure 4