Installation Guide

Deck-A-Floor PRO Clip Cont.

**Shortening the DAF PRO Clip 5**

1. The PRO Clip 5 can be shortened very easily by

using a Stanely knife to cut in between the

connection of each individual clip as shown in

Figure 10.

2. As shown in Figure 11 you can see that we cut

the PRO Clip 5 into a 3.

3. Figure 11 shows the result of shortening the clip.

Note: Remember to make sure you are

shortening the right side of the clip because on a

PRO Clip 5 one side will have the female

connection and the other side will have the male.

So, once one side is cut oﬀ it can’t be used

again.

Continued on the next page.

Figure 10

Figure 11 Figure 12