MSDS
NTEK- 2013DC1212015S
Page 4 of 8
Steps to be taken in case Material is Released or Spilled
If the battery is accidental broken and leaks out, wipe it up with a cloth, and dispose of it in a plastic
bag and put into a steel can. The preferred response is to leave the area and allow the batteries to
cool and vapors to dissipate. Provide maximum ventilation. Avoid skin and eye contact or inhalation
of vapors. Remove spilled material with absorbent.
Waste Disposal Method
It is recommended to discharge the battery to the end, recycle copper and other metal, handing in
the abandoned batteries to related department unified, and dispose of the batteries in accordance
with approved local, state, and federal requirements. Consult state environmental protection agency
and/or federal EPA.
Section 7 – Handling and Storage
The batteries should not be opened, destroyed or incinerate, since they may leak or rupture and
release to the environment the ingredients that they contain in the hermetically sealed container. Do
not short circuit terminals, or charge the battery, forced over-discharge, throw to fire. Do not crush or
puncture the battery, or immerse in liquids.
Precautions to be taken in handling and storing
Avoid mechanical or electrical abuse. Storage preferably in cool, dry and ventilated area, which is
subject to little temperature change. Storage at high temperatures should be avoided. Do not place
the battery near heating equipment, nor expose to direct sunlight for long periods.
Other Precautions
Do not short or install with incorrect polarity.
Section 8 – Exposure Controls and Personal Protection
Respiratory Protection
In case of battery venting, provide as much ventilation as possible. Avoid confined areas with
venting batteries. Respiratory Protection is not necessary under conditions of normal use.
Other Protective Clothing or Equipment
Not necessary under conditions of normal use.
Personal Protection is recommended for venting batteries: Respiratory Protection, Protective
Gloves, Protective Clothing and Safety Glass with side shields.
Section 9 - Physical and Chemical Properties
Nominal Voltage: 1.2V
Rated Capacity: 350~2500mAh.
Appearance Characters: Silver, cylindrical, with odorless solid battery.