Installation & Assembly

Decking Installation Guide / v20191125US 19
DIAGRAM 43
DIAGRAM 45
DIAGRAM 46
DIAGRAM 47
DIAGRAM 48
DIAGRAM 44
DIAGRAM 42
1
Start by unfastening all the clips from the joist
on both sides of the board as shown below in
Diagram 42.
2
Next slide all clips out of the board as
shown below in Diagram 43.
3
Next slide out the board as shown below in
Diagram 44.
4
After the board is removed the new board
can be inserted as shown below in Diagram
45 and 46.
5
After the new board is in position insert the
clips through the groove and into the
correct position as shown in Diagram 47.
The clips should then be installed as shown
in Diagram 48.
Removing a board