Deck Tile Installation Guide v20170809
IMPORTANT: Read All Sections Before You Start For the most up to date information, please visit our website @ www.newtechwood.com Prior to installing any composite product, it is recommended that you check with local building codes for any special requirements or restrictions. The diagrams and instructions outlined in this guide are for illustration purposes only and are not meant or implied to replace a licensed professional.
Installing Deck Tile: The Deck Tile is relatively easy to install using its four side interlocking base making it very user friendly. Each side has two male and female connectors that connect to an adjacent tile, these connectors are circled in Diagram 1. DIAGRAM 3 DIAGRAM 4 DIAGRAM 1 1 3 Now, take the second tile and align the connectors up with the first tile as shown in Diagram 5. Place the first tile in a corner or flush along the edge of the area you will be installing as shown in Diagram 2.
5 Finally, attach the last two connectors and push down to lock everything into place as shown in Diagram 7. 3 Continue to pull with the gripped hand until finally all connectors are separated from the adjacent tile as shown in Diagram 10. DIAGRAM 7 DIAGRAM 10 6 Repeat steps 1-5 until deck is completed. Cutting Removing Tiles: 1 If a tile needs to be removed, the best way is to first have one hand grip one tile’s edge and the other to be on the adjacent tile as shown in Diagram 8.
3 Then, take the Deck Tile and cut either with a circular saw, table saw, hand saw, or jigsaw. Always remember to use a carbide tip blade on these tools as shown in Diagram 12 & 13. The final piece we cut for this corner is shown in Diagram 14. Note: Before cutting, always turn the Deck Tile over and make sure that the cut lines you have marked on the Deck Tile do not cross over any screws on the back. Never ever should you be cutting through the screws.
Repeat steps 1-5 for any other corners/ edges until the deck is completed. Outward Fascia/Trim Place the outward fascia/trim as shown in Diagram 20 to finish the deck’s corner. DIAGRAM 20 Inward Fascia/Trim Installing Fascia/Trim Place the inward fascia/trim as shown in Diagram 21 to finish the deck’s corner. The Deck Tile has three different fascia/trim options: straight, inward and outward fascia/trim. Straight Fascia/Trim Place the straight fascia/trim as shown in Diagram 19 to finish the deck.
Deck Tile Installation Guide v20170809 ©2017 Huidong Meixin Plastic Lumber Products Manufacturing Co., Ltd. NewTechWood® is a registered trademark of Huidong Meixin Plastic Lumber Products Manufacturing Co., Ltd. To obtain a copy of the most current version of this installation guide, visit us online at www.newtechwood.com.
