Installation Guide

Decking Installation Guide / v20200731US 14
DIAGRAM 17
Diagram 18 below shows a completed staircase from the side to get a better idea of how the nal installation
will look.
5
Finally, nish your last board by face xing into the board at every joist as shown in Diagram 17.
Note: Remember to pre-drill before face xing into the board. Also face xing must happen
at a 90 degree angle and must be at least 1” 1/2 by 1” 1/2 from the ends and the width of the
board.
DIAGRAM 18
Stringer
T-Clip
Face Screw
Riser
Starting Clip