Installation Guide

Decking Installation Guide / v20200731US 16
1
After calculating the decking span and making the frame of your deck, the rst board is ready to be
installed.
Locking Clip (TC-1)
T-Clip (TC-2)
DIAGRAM 21
Option 1:
T-Clip and TC-1 Locking Clip Installation
2
After getting all the TC-1 and TC-2 clips into position above each respective joist, begin to fasten
them from above as shown in Diagram 22 and 23.
Note: The fastest way of installation is by pushing all the boards together and then coming
back and sliding the clips into the grooves from the side and then xing from above.
DIAGRAM 22
DIAGRAM 23
3
Repeat steps 1-2 until the deck is complete.