Installation Guide

Decking Installation Guide / v20200731US 18
3
Next, x the screw down into the joist as shown in Diagram 27.
DIAGRAM 27
4
After xing all clips, push the next board into the clips as shown in Diagram 28 and 29.
DIAGRAM 28 DIAGRAM 29
DIAGRAM 30
6
The nal look should be like the below Diagram 30.
Note: The locking clip is in the middle of Diagram 30 to show the expansion and contraction is
happening in both directions. For more information on how to install the locking clips and their
placement, check page 8-9 of this installation guide.
5
Repeat steps 1-4 until complete.
Locking Clip