Installation Guide

Option 2: UltraLock System
1. First slide the UL-1 and UL-2 clips into the
grooves of the boards at a 30-45 degree angle
at their respective joists as shown in Diagram
27.
Diagram 27
3. Next, screw the clips into the joists using a 45
degree angle
Diagram 29
Note: Using hidden fasteners that are not
manufactured by NewTechWood nor
recommended by NewTechWood are not
warranted. Use these fasteners at your own
risk.
Diagram 28
2. Once the clip is in press down and the clip will
be ready to install into the joists as shown in
Diagram 27 & 28.
4. Once all clips are screwed down the next
board will come in at a 30-45 degree angle and
then pushed down into place as shown in
Diagram 30.
Diagram 30
v20151224