Installation Guide

European Siding System Installation Guide / v20190215 10
DIAGRAM 6
DIAGRAM 7
5
Now take two 23/64 x 5/16 inch (9 x 8 mm)
wooden board and install it in the inside
corner as shown in Diagram 8 and 9.
Note: These boards will ensure there is a
backing for face xing when nishing the
siding at the inside corner. Without these
boards the screw will not be able to be
face.
4
Install the F trim on the outer most edge as
shown below in Diagram 7.
3
Next, the span needs to be measured for the
next joist. Please review page 6 for the
maximum span allowed from the center to
center of each joist.
Diagram 6 shows the nal installation.