Installation Guide

European Siding System Installation Guide / v20190215 13
DIAGRAM 12
DIAGRAM 13
8
Lastly take another F trim and install the
other outer most edge as shown in
Diagram 12.
1
Take a siding board and start on the wall
with the outer corner trim and inside wall as
shown in Diagram 13. Pre drill the siding and
face x through the siding and joists.
Installing the siding boards
2
Next take the AW08 clips and place them
on each joist and screw down to the joist.
Note: Remember for the middle AW08
clip that you must in addition screw
down in the second hole provide in the
clip through the board as well. This will
allow it to expand and contract readily.