Installation Guide

19
European Siding System-Horizontal Installation Guide / v20210324US
Click to return to Content Table
Diagram 5
Detail 5-1
Detail 5-2
Detail 5-3
5
Install the Starting Trim (AW02) at the
end of the joists opposite the floor with
screws, as shown in Diagram 5 .
Detail 5-1
Starting Trim (AW02)
Note:

A minimum gap of 3/16" (5mm) needs to

and the F-Trim (UH50), as shown in
Detail 5-1 

A minimum gap of 7/16" (11mm) and 2

Starting Trim (AW02) and the adjacent
wall in the inside corner, as shown in
Detail 5-2 

A minimum gap of 3/16" (5mm) needs to

and the Outside Corner Trim (UH51), as
shown in Detail 5-3 
Wall
Outside
Corner Trim
(UH51)
Min 3/16"
(5mm)
Furring
Strip
Starting
Trim
(AW02)
Wall
Starting
Trim
(AW02)
Furring
Strip
Min 7/16"
(11mm)
Min 2 1/2"
(63mm)
Min 3/16"
(5mm)
Wall
Furring Strip
Outside
Corner Trim
(UH51)
Starting
Trim
(AW02)